Added separate ota config file based on the prj file.

Parameters are based on the zigbee light switch example from nrf-connect toolkit.
clang-format with vs code.

code/nrf-connect/samples/zigbee/prj_ota.conf

@@ -0,0 +1,89 @@
+
+CONFIG_LOG=y
+CONFIG_PWM=y
+CONFIG_I2C=y
+CONFIG_ADC=y
+CONFIG_GPIO=y
+
+CONFIG_USE_SEGGER_RTT=y
+CONFIG_SEGGER_RTT_BUFFER_SIZE_UP=4096
+
+CONFIG_NEWLIB_LIBC=y
+CONFIG_NEWLIB_LIBC_FLOAT_PRINTF=y
+
+CONFIG_SERIAL=n
+
+CONFIG_HEAP_MEM_POOL_SIZE=2048
+CONFIG_MAIN_THREAD_PRIORITY=7
+
+CONFIG_ZIGBEE=y
+CONFIG_ZIGBEE_APP_UTILS=y
+CONFIG_ZIGBEE_ROLE_END_DEVICE=y
+
+# This example requires more workqueue stack
+CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=2048
+
+# Enable nRF ECB driver
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_NRF_ECB=y
+CONFIG_CRYPTO_INIT_PRIORITY=80
+
+# Networking
+CONFIG_NET_IPV6=n
+CONFIG_NET_IPV6_MLD=n
+CONFIG_NET_IPV6_NBR_CACHE=n
+CONFIG_NET_IPV6_RA_RDNSS=n
+CONFIG_NET_IP_ADDR_CHECK=n
+CONFIG_NET_UDP=n
+
+##
+## ZigBee Channel Selection
+##
+# Get Zigbee to scan every channel.
+CONFIG_ZIGBEE_CHANNEL_SELECTION_MODE_MULTI=y
+# By default only scans channel 11 (ZigBee2MQTT default) and 15 (ZHA default).
+# Comment to scan all channels - this will make pairing consume more energy.
+# CONFIG_ZIGBEE_CHANNEL_MASK=0x8800
+
+# Uncomment to set a specific channel - this will make pairing more energy efficient.
+# CONFIG_ZIGBEE_CHANNEL=15
+
+# Enable API for powering down unused RAM parts.
+# https://developer.nordicsemi.com/nRF_Connect_SDK/doc/1.7.1/nrf/ug_zigbee_configuring.html#power-saving-during-sleep
+CONFIG_RAM_POWER_DOWN_LIBRARY=y
+
+# LittleFS.
+CONFIG_MAIN_STACK_SIZE=2048
+CONFIG_FLASH=y
+CONFIG_FLASH_MAP=y
+CONFIG_FLASH_PAGE_LAYOUT=y
+CONFIG_FILE_SYSTEM=y
+CONFIG_FILE_SYSTEM_LITTLEFS=y
+
+CONFIG_WATCHDOG=y
+CONFIG_HWINFO=y
+CONFIG_ASSERT=y
+
+# Uncomment for debug log level.
+# CONFIG_LOG_DEFAULT_LEVEL=4
+
+# Factory reset method selection. Only hardware revision 2.0.0+ has button SW1. Earlier
+# revisions must select a different method. See Kconfig for options.
+# CONFIG_PRST_ZB_FACTORY_RESET_VIA_SW1=y
+# Disable factory reset.
+
+# OTA update configuration. This is based on the zigbee light switch example from the nrf-connect toolkit.
+CONFIG_ZIGBEE_FOTA=y
+CONFIG_ZIGBEE_FOTA_ENDPOINT=5
+CONFIG_MCUBOOT_IMGTOOL_SIGN_VERSION="1.0.0" # Increase this version for generating an update for the devices.
+CONFIG_ZIGBEE_FOTA_COMMENT="b_parasite"
+
+# Ensure an MCUboot-compatible binary is generated.
+CONFIG_IMG_MANAGER=y
+CONFIG_STREAM_FLASH=y
+CONFIG_DFU_TARGET_MCUBOOT=y
+CONFIG_IMG_ERASE_PROGRESSIVELY=y
+CONFIG_ZIGBEE_FOTA_PROGRESS_EVT=y
+
+# Increase the number of RX buffers
+CONFIG_NRF_802154_RX_BUFFERS=32

code/nrf-connect/samples/zigbee/src/main.c

@@ -17,9 +17,9 @@
 #include <zigbee/zigbee_error_handler.h>
 
 #if CONFIG_ZIGBEE_FOTA
-#include <zigbee/zigbee_fota.h>
-#include <zephyr/sys/reboot.h>
 #include <zephyr/dfu/mcuboot.h>
+#include <zephyr/sys/reboot.h>
+#include <zigbee/zigbee_fota.h>
 #endif
 
 #include "debug_counters.h"
@@ -134,8 +134,7 @@ ZBOSS_DECLARE_DEVICE_CTX_2_EP(
     zigbee_fota_client_ep,
     app_template_ep);
 
-static void confirm_image(void)
+static void confirm_image(void) {
-{
   if (!boot_is_img_confirmed()) {
     int ret = boot_write_img_confirmed();
 
@@ -147,8 +146,7 @@ static void confirm_image(void)
   }
 }
 
-static void ota_evt_handler(const struct zigbee_fota_evt *evt)
+static void ota_evt_handler(const struct zigbee_fota_evt *evt) {
-{
   switch (evt->id) {
     case ZIGBEE_FOTA_EVT_PROGRESS:
       // dk_set_led(OTA_ACTIVITY_LED, evt->dl.progress % 2);
@@ -169,8 +167,7 @@ static void ota_evt_handler(const struct zigbee_fota_evt *evt)
   }
 }
 
-static void zcl_device_cb(zb_bufid_t bufid)
+static void zcl_device_cb(zb_bufid_t bufid) {
-{
   zb_zcl_device_callback_param_t *device_cb_param =
       ZB_BUF_GET_PARAM(bufid, zb_zcl_device_callback_param_t);