Re-create separate prj_fota.conf

code/nrf-connect/samples/zigbee/Kconfig

@@ -46,39 +46,3 @@ endchoice  # PRST_ZB_FACTORY_RESET_METHOD
 config PRST_ZB_RESTART_WATCHDOG_TIMEOUT_SEC
     int "Duration after the device will restart the rejoin procedure if a network has not been successfully joined."
     default 3600
-
-if ZIGBEE_FOTA
-
-config ZIGBEE_FOTA_ENDPOINT
-    int "Endpoint number for ota zigbee endpoint. Must not be used by another application."
-    default 5
-
-config ZIGBEE_FOTA_COMMENT
-    string
-    default "b-parasite"
-
-config IMG_MANAGER
-    bool "Ensure an MCUboot-compatible binary for ota update is generated."
-    default y
-
-config STREAM_FLASH
-    bool
-    default y
-
-config DFU_TARGET_MCUBOOT
-    bool
-    default y
-
-config IMG_ERASE_PROGRESSIVELY
-    bool
-    default y
-
-config ZIGBEE_FOTA_PROGRESS_EVT
-    bool
-    default y
-
-config NRF_802154_RX_BUFFERS
-    int "Increase the number of RX buffers for ota functionality."
-    default 32
-
-endif

code/nrf-connect/samples/zigbee/prj.conf

@@ -70,8 +70,3 @@ CONFIG_ASSERT=y
 # Factory reset method selection. Only hardware revision 2.0.0+ has button SW1. Earlier
 # revisions must select a different method. See Kconfig for options.
 # CONFIG_PRST_ZB_FACTORY_RESET_VIA_SW1=y
-## OTA section
-
-# OTA update configuration. This is based on the zigbee light switch example from the nrf-connect toolkit.
-CONFIG_ZIGBEE_FOTA=n
-CONFIG_MCUBOOT_IMGTOOL_SIGN_VERSION="1.0.0" # Increase this version for generating an update for the devices.

code/nrf-connect/samples/zigbee/prj_fota.conf

@@ -0,0 +1,96 @@
+
+CONFIG_LOG=y
+CONFIG_PWM=y
+CONFIG_I2C=y
+CONFIG_ADC=y
+CONFIG_GPIO=y
+
+CONFIG_USE_SEGGER_RTT=y
+CONFIG_SEGGER_RTT_BUFFER_SIZE_UP=4096
+
+CONFIG_NEWLIB_LIBC=y
+CONFIG_NEWLIB_LIBC_FLOAT_PRINTF=y
+
+CONFIG_SERIAL=n
+
+CONFIG_HEAP_MEM_POOL_SIZE=2048
+CONFIG_MAIN_THREAD_PRIORITY=7
+
+CONFIG_ZIGBEE=y
+CONFIG_ZIGBEE_APP_UTILS=y
+CONFIG_ZIGBEE_ROLE_END_DEVICE=y
+
+# This example requires more workqueue stack
+CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=2048
+
+# Enable nRF ECB driver
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_NRF_ECB=y
+CONFIG_CRYPTO_INIT_PRIORITY=80
+
+# Networking
+CONFIG_NET_IPV6=n
+CONFIG_NET_IPV6_MLD=n
+CONFIG_NET_IPV6_NBR_CACHE=n
+CONFIG_NET_IPV6_RA_RDNSS=n
+CONFIG_NET_IP_ADDR_CHECK=n
+CONFIG_NET_UDP=n
+
+##
+## ZigBee Channel Selection
+##
+# Get Zigbee to scan every channel.
+CONFIG_ZIGBEE_CHANNEL_SELECTION_MODE_MULTI=y
+# By default only scans channel 11 (ZigBee2MQTT default) and 15 (ZHA default).
+# Comment to scan all channels - this will make pairing consume more energy.
+# CONFIG_ZIGBEE_CHANNEL_MASK=0x8800
+
+# Uncomment to set a specific channel - this will make pairing more energy efficient.
+# CONFIG_ZIGBEE_CHANNEL=11
+
+# Enable API for powering down unused RAM parts.
+# https://developer.nordicsemi.com/nRF_Connect_SDK/doc/1.7.1/nrf/ug_zigbee_configuring.html#power-saving-during-sleep
+CONFIG_RAM_POWER_DOWN_LIBRARY=y
+
+# LittleFS.
+CONFIG_MAIN_STACK_SIZE=2048
+CONFIG_FLASH=y
+CONFIG_FLASH_MAP=y
+CONFIG_FLASH_PAGE_LAYOUT=y
+CONFIG_FILE_SYSTEM=y
+CONFIG_FILE_SYSTEM_LITTLEFS=y
+
+CONFIG_WATCHDOG=y
+CONFIG_HWINFO=y
+CONFIG_ASSERT=y
+
+# Uncomment for debug log level.
+# CONFIG_LOG_DEFAULT_LEVEL=4
+
+# Factory reset method selection. Only hardware revision 2.0.0+ has button SW1. Earlier
+# revisions must select a different method. See Kconfig for options.
+# CONFIG_PRST_ZB_FACTORY_RESET_VIA_SW1=y
+
+##
+## OTA section.
+##
+
+# Software build version in the basic_attrs cluster.
+CONFIG_PRST_ZB_SOFTWARE_VERSION="test-sw-1"
+
+# Enable Zigbee FOTA library
+CONFIG_ZIGBEE_FOTA=y
+CONFIG_ZIGBEE_FOTA_HW_VERSION=52
+CONFIG_ZIGBEE_FOTA_ENDPOINT=5
+CONFIG_MCUBOOT_IMGTOOL_SIGN_VERSION="1.0.0"
+CONFIG_ZIGBEE_FOTA_COMMENT="b-parasite"
+
+# Ensure an MCUboot-compatible binary is generated.
+CONFIG_IMG_MANAGER=y
+CONFIG_STREAM_FLASH=y
+CONFIG_DFU_TARGET_MCUBOOT=y
+CONFIG_IMG_ERASE_PROGRESSIVELY=y
+CONFIG_ZIGBEE_FOTA_PROGRESS_EVT=y
+
+# Increase the number of RX buffers
+CONFIG_NRF_802154_RX_BUFFERS=32