CONFIG_LOG=y
CONFIG_PWM=y
CONFIG_I2C=y
CONFIG_ADC=y
CONFIG_GPIO=y

CONFIG_USE_SEGGER_RTT=y
CONFIG_SEGGER_RTT_BUFFER_SIZE_UP=4096

CONFIG_NEWLIB_LIBC=y
CONFIG_NEWLIB_LIBC_FLOAT_PRINTF=y

CONFIG_SERIAL=n

CONFIG_HEAP_MEM_POOL_SIZE=2048
CONFIG_MAIN_THREAD_PRIORITY=7

CONFIG_ZIGBEE=y
CONFIG_ZIGBEE_APP_UTILS=y
CONFIG_ZIGBEE_ROLE_END_DEVICE=y

# This example requires more workqueue stack
CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=2048

# Enable nRF ECB driver
CONFIG_CRYPTO=y
CONFIG_CRYPTO_NRF_ECB=y
CONFIG_CRYPTO_INIT_PRIORITY=80

# Networking
CONFIG_NET_IPV6=n
CONFIG_NET_IPV6_MLD=n
CONFIG_NET_IPV6_NBR_CACHE=n
CONFIG_NET_IPV6_RA_RDNSS=n
CONFIG_NET_IP_ADDR_CHECK=n
CONFIG_NET_UDP=n

##
## ZigBee Channel Selection
##
# Get Zigbee to scan every channel.
CONFIG_ZIGBEE_CHANNEL_SELECTION_MODE_MULTI=y
# By default only scans channel 11 (ZigBee2MQTT default) and 15 (ZHA default).
# Comment to scan all channels - this will make pairing consume more energy.
# CONFIG_ZIGBEE_CHANNEL_MASK=0x8800

# Uncomment to set a specific channel - this will make pairing more energy efficient.
# CONFIG_ZIGBEE_CHANNEL=11

# Enable API for powering down unused RAM parts.
# https://developer.nordicsemi.com/nRF_Connect_SDK/doc/1.7.1/nrf/ug_zigbee_configuring.html#power-saving-during-sleep
CONFIG_RAM_POWER_DOWN_LIBRARY=y

# LittleFS.
CONFIG_MAIN_STACK_SIZE=2048
CONFIG_FLASH=y
CONFIG_FLASH_MAP=y
CONFIG_FLASH_PAGE_LAYOUT=y
CONFIG_FILE_SYSTEM=y
CONFIG_FILE_SYSTEM_LITTLEFS=y

CONFIG_WATCHDOG=y
CONFIG_HWINFO=y
CONFIG_ASSERT=y

# Uncomment for debug log level.
# CONFIG_LOG_DEFAULT_LEVEL=4

# Factory reset method selection. Only hardware revision 2.0.0+ has button SW1. Earlier
# revisions must select a different method. See Kconfig for options.
# CONFIG_PRST_ZB_FACTORY_RESET_VIA_SW1=y

##
## OTA section.
##

# Software build version in the basic_attrs cluster.
CONFIG_PRST_ZB_SOFTWARE_VERSION="dev"

# Enable Zigbee FOTA library
CONFIG_ZIGBEE_FOTA=y

CONFIG_ZIGBEE_FOTA_ENDPOINT=5
CONFIG_ZIGBEE_FOTA_LOG_LEVEL_DBG=y

# FOTA manufacturer ID. Defaults to 0x127f (Nordic).
# CONFIG_ZIGBEE_FOTA_MANUFACTURER_ID=0x0000

# This must be BOARD_REVISION_CODE.
# TODO: move this to Kconfig.
CONFIG_ZIGBEE_FOTA_HW_VERSION=4

# Set for which hardware versions this FOTA image is valid.
CONFIG_ENABLE_ZIGBEE_FOTA_MIN_HW_VERSION=y
CONFIG_ZIGBEE_FOTA_MIN_HW_VERSION=0x00
CONFIG_ENABLE_ZIGBEE_FOTA_MAX_HW_VERSION=y
CONFIG_ZIGBEE_FOTA_MAX_HW_VERSION=0xff

# 0.0.0 is a safe default for development.
CONFIG_MCUBOOT_IMGTOOL_SIGN_VERSION="0.0.0"
CONFIG_ZIGBEE_FOTA_COMMENT="b-parasite"

# Ensure an MCUboot-compatible binary is generated.
CONFIG_IMG_MANAGER=y
CONFIG_STREAM_FLASH=y
CONFIG_DFU_TARGET_MCUBOOT=y
CONFIG_IMG_ERASE_PROGRESSIVELY=y
CONFIG_ZIGBEE_FOTA_PROGRESS_EVT=y

# Increase the number of RX buffers
CONFIG_NRF_802154_RX_BUFFERS=32