History

Ole Odendahl 100f4046fa Added basic readme for flashing based on issue #67 .		2022-10-23 18:10:08 +02:00
..
.gitignore	Moving the flashing files to different subfolder for better discoverability.	2022-10-23 18:09:43 +02:00
flash_firmware.py	Moving the flashing files to different subfolder for better discoverability.	2022-10-23 18:09:43 +02:00
mac_address_reader.py	Moving the flashing files to different subfolder for better discoverability.	2022-10-23 18:09:43 +02:00
README.md	Added basic readme for flashing based on issue #67 .	2022-10-23 18:10:08 +02:00
requirements.txt	Moving the flashing files to different subfolder for better discoverability.	2022-10-23 18:09:43 +02:00

README.md

Flashing with pyocd

This is a different approach to flash the firmware on the b-parasites. It is completely optional.

Basic instructions

(Based on the discussion in issue #67)

The instructions will probably differ alot depending on your debugging probe and hardware setup.

The setup is fairly straightforward and documented in the pyocd docs.

I used an inexpensive debugging probe from Aliexpress called nanoDAP from Muse Labs which is less than 10 € and readily available. The J-LINKs are hard to get and quite expensive. In my understanding basically all CMSIS-DAP-compatible probes which are recognized by pyocd should work.

After connecting the debugging probe via usb and connecting the b-parasite as described in the wiki, flashing was easy and fast.

For a complete flashing of softdevice and firmware use the provided python script. Assuming you put the *.hex files in default locations it boils down to one simple command:

python ./flash_firmware.py

For help and documentation of the available command line flags use

python ./flash_firmware.py -h