From 56034b6394cf2c8f475b3a93ecea00020706b6ad Mon Sep 17 00:00:00 2001 From: "Daniel G. Mevec" Date: Mon, 7 Apr 2025 18:25:33 +0200 Subject: [PATCH] specify some quantities --- overleaf/Kapitel/validation_data.tex | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/overleaf/Kapitel/validation_data.tex b/overleaf/Kapitel/validation_data.tex index 132edc5..4be7ebe 100644 --- a/overleaf/Kapitel/validation_data.tex +++ b/overleaf/Kapitel/validation_data.tex @@ -101,7 +101,7 @@ The trade-off was accepting a relaxation of tangential residual stresses, that w \subfloat{\includegraphics[width=0.5\linewidth]{Abbildungen/KW_sample_cut-1.png}} \\ \subfloat{\includegraphics[width=0.5\linewidth]{Abbildungen/KW_sample_cut-2.png}} \\ \subfloat{\includegraphics[width=0.5\linewidth]{Abbildungen/KW_sample_cut-3.png}} \\ - \caption{Steps of sample extraction for the synchrotron experiments. Cuts going from \textbf{(b)} to \textbf{(c)} were done by electrical discharge machining to a thickness of \qty{3}{\mm}?? and then carefully ground to eliminiate surface stresses from the \acrshort{edm} process, resulting in a final thickness of \qty{2.43}{\mm}.}\label{fig:hexrd-sample-prep} + \caption{Steps of sample extraction for the synchrotron experiments. Cuts going from \textbf{(b)} to \textbf{(c)} were done by electrical discharge machining to a thickness of \qty{3}{\mm} and then carefully ground to eliminiate surface stresses from the \acrshort{edm} process, resulting in a final thickness of \qty{2.43}{\mm}.}\label{fig:hexrd-sample-prep} \end{figure}